pH Plus is used for increasing the pH of pool and spa water. This product should be added to your water if your test kit result indicates that the pH is low. Test the pH of the pool water and if it is below 7.2, use Blue Horizons pH Plus to raise it.
The ideal pool pH levels are between 7.2 - 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.H of the pool water and if it is below 7.2, use Blue Horizons pH Plus to raise it.
Instructions for Use:
- Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned “on”, preferably near to the water inlets to aid distribution.
- After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established.
| Dose Rates |
| Litres |
Gallons |
Dose Rate |
| 4,545 |
1,000 |
50g |
| 9,090 |
2,000 |
100g |
| 22,500 |
5,000 |
250g |
| 45,450 |
10,000 |
500g |
Please note that depending on your pH level, a number of treatments may be required.
Always read the instructions on the container prior to use.
