Elecro Evo Titanium Electric Heater - 9kW 1-Phase

The Elecro Evolution pool heater is manufactured from top quality components and materials at the elecro works in Hertfordshire, England. This heater features a titanium tank body with titanium heater elements.
£732.00
£475.80
£396.50 (ex. VAT)
£256.20 saving
35% off
The ELECRO EVOLUTION pool heater is manufactured from top quality components and materials at the Elecro works in Hertfordshire, England.  This heater features a Titanium Tank Body with Titanium Heater Elements.

Construction consists of a flow tube which is fitted with Inlet and Outlet mouldings manufactured from specially formulated polymer alloy material. Universal ABS unions are provided to allow solvent weld connection to the inlet and outlet pipe work. The outlet moulding accommodates a reversible flow switch with a gold tipped reed, and Titanium pin. The heater is supported on two swivel feet; these can swivel to permit either wall or floor mounting. The heater control components are positioned on the front face of the casing.The water inlet and outlet fittings can facilitate connection to either metric or imperial standard pipe. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking. 

Operation:

The desired pool temperature can be easily set on the ELECRO EVOLUTION heater using the panel-mounted thermostat dial. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).

Specifications:
 
Heater Size: 9kW
Power Supply: 230V Single Phase
Load: 40 Amp
Minimum Flow: 1m3/h
Heating Elements: Titanium
Flow Tubes: Titanium
Control Thermostat: 0 to 40°C (1°C differential)
Safety Thermal Cut Out: 55°C (manual reset)
Flow Switch: Gold tipped reed switch with Titanium Fulcrum pin
Water Connections: 1½” BSP female thread
supplied with 1½” to 50mm ABS unions
Working Pressure: 4 barg maximum
Mounting: Floor or wall mounting
Heater Length: 462 mm
Heater Product Code: T89
Warranty: Three year manufacturers warranty (conditional)

Standards compliance:
  • European Electromagnetic Compatibility directive 89/336/EEC and 93/068/EEC
Harmonised Standards:
  • EN 55014 – EN55104, EN 5501, EN 5502, CEI 801-4, CEI 801-2, CEI 801-3
  • The European Low Voltage Directive 72/23/EEC
  • The Harmonised Standard EN 60335-2-35
MPN T89
Brand Elecro Evo
Condition New
Product Code PSHET090
Weight 1kg