Water Balance Products

This product raises Total Alkalinity, which is the measure of the water’s ability to resist pH change.  Low total alkalinty (TA) may cause pool water to be corrosive and the pH level difficult to maintain. Total alkalinity should be maintained at between 80 - 150 mg/l (ppm).

This product raises Calcium Hardness, which is the measurement of dissolved calcium in water. For swimming pools, calcium hardness should be maintained at a minimum of 200 mg/l (ppm). Low levels can harm the pool and its equipment as the water will be corrosive.

pH Minus is used for reducing th pH of pool and spa water. This product should be added to your pool or spa water if your test kit indicated that the pH is high.

pH Plus is used for increasing the pH of pool and spa water. This product should be added to your water if your test kit result indicates that the pH is low.  Test the pH of the pool water and if it is below 7.2, use Blue Horizons pH Plus to raise it. 

Stain and Scale Inhibitor will help prevent and/or remove unsightly metal or other staining (e.g. from leaves) and also control and/or remove scale.

pH Plus is used for increasing the pH of pool and spa water. This product should be added to your water if your test kit result indicates that the pH is low.  Test the pH of the pool water and if it is below 7.2, use Blue Horizons pH Plus to raise it. 

pH Minus is used for reducing the pH of pool and spa water. This product should be added to your pool or spa water if your test kit indicated that the pH is high.

Blue Horizons Rapid Dissolving Stabiliser Granules are a unique fast dissolving grade of Cyanuric Acid for UV Stabilisation.

Blue Horizons Chlorine Reducer is used for lowering chlorine or bromine levels in pool water after shock treatment or as a problem solver if the pool has been accidentally ‘overdosed’.

Blue Horizons Concentrated Phos Away is a dual action phosphate remover and controller, so can be used for prevention or cure.

Fi-Clor Alkanity Increaser is used to correct low alkalinity levels in pool and spa water.

Fi-Clor Calcium Hardness Increaser is a product designed to increase calcium levels without the need to pre-dissolve.

Fi-Clor pH & Alkalinity Reducer should be used to correct high levels of pH or alkalinity.

Fi-Clor pH Increaser (Soda Ash) is used to raise the pH level in swimming pool water.